Home

Pinch points Toolbox Talk pdf

TOOLBOX TALK: Pinch Point Recognition By: Ray Purcell, Gipson Steel, Inc. May 2018 A Pinch Point is produced when 2 objects come together there is a possibility that a person could be caught or injured when coming in contact with that area. Pinch Points commonly impact fingers and hands, but ca Topic 605: Pinch Point Safety Introduction: Pinch point means a point at which it is possible to be caught between the moving parts of a machine, or between the moving and stationary parts of a machine, or between material and any part of a machine. Pinch points are a commonly overlooked hazard on the job site At work, pinch points are those situations where machines, hand tools, and conditions put our hands, feet, and sometimes our entire body in danger. An injury can come from something as small as a pair of pliers, or as large as an excavator. Most tools have, or can cause pinch points. It might surpris

Causes and controls for preventing pinch point injuries

  1. TOOLBOX TALK Pinch Points Print Date: ICA News 9/18/2013 Quality People. Quality Projects. Indiana Construction Association One North Capitol Avenue Suite 1000 Indianapolis, Indiana 46204 Phone (317) 472-6777 Fax (317) 472-6767 318 Main Street Suite 401 Evansville, Indiana 47708 Phone (812) 477-0881 Fax (812) 421-5883 inconstruction.or
  2. A. Recognize pinch point hazards. B. Know how to prevent pinch point injuries. OSHA 29 Regulations: CFR 1910.2 1-222. 1. Workplace Injuries May Occur When a Body Part Gets Caught in a Pinch Point. A. A pinch point is a place where it's possible for a body part to be caught: 1. Between moving machine parts . 2
  3. Toolbox Safety Talks Pinch Points Rockwood Casualty Insurance Company (Rockwood) may provide safety management services to its insureds in order to reduce the risk of loss that may lead to insurance claims. The information and advice we provide is not intended to include all possible safety measures and controls

Pinch Points — Construction Center of Excellenc

Avoid Those Pinch Points. Avoid placing your hands and fingers near any pinch point when opening up or folding closed your portable step ladder. This is especially a hazard at the points where the spreaders on step ladders are attached and hinged near the top part of the ladder, as they act like a scissor closing as the ladder is folded shut Struck-by Toolbox Talk # 1 How an We e Safe Around Equipment? Ask the following questions and give time for answers. What are the hazards? Employees working around heavy equipment are exposed to pinch points, back-in-to, run-over, and back-over hazards when working in proximity to heavy equipment and construction vehicles

Pinch Points Safety Talk - SafetyNow IL

  1. g in contact with that area. Pinch points commonly impact fingers / hands, but can.
  2. A. Knives and pinch points B. Hot spots, rotating machinery C. Automated Machinery, Jewelry, rings, loose clothing, and hand tools D. All of the above 10. Impact tools such as chisels or wedges are unsafe if they have mushroomed heads. The heads might shatter on impact, sending sharp fragments flying. A. True B. Fals
  3. Toolbox Talk: Caught In or Between . Each year workers suffer approximately 125,000 caught or crushed injuries which occur when body parts get caught between two objects or entangled with machinery. These hazards are also referred to as pinch points. The physical forces applied to a body part caught in
  4. a Toolbox Talk or a Tailgate Talk) is designed not only to communicate important safety information to your employees, but also to be given to them by you, which These hazards are also referred to as pinch points. The physical forces applied to a body part caught in a pinch point can vary and cause injuries ranging from bruises, cuts.
  5. Pinch Points: Points at which it is possible to be caught be-tween moving parts, or between moving and stationary parts of a piece of equipment Date: 10/6/08 Toolbox Talk #14 Table saws need to have proper guards Barrier devices create a safety buffer for employee

Pinch Points. September 01, 2016 / Megan Quint. A Pinch Point is produced when 2 objects come together and there is a possibility that a person could be caught or injured when coming in contact with that area. Pinch points commonly impact fingers / hands, but can impact any area of the body. The injury resulting from a pinch point could be as. Pinch Points Safety Talk. Favorite Print Email . WHAT'S AT STAKE? A pinch point is any point at which it is possible for a person or part of a person's body to be caught between moving parts of a machine, or between the moving and stationary parts of a machine, or between material and any part of the machine according to the Michigan. - Be aware of pinch points - Be aware of hot areas - Be aware of rotating or moving surfaces - Automated machinery may be controlled by remote control, or delayed timing devices that cause the machine to start automatically - Loose clothing and jewelry may be caught up in moving machinery - Never remove machine safeguards or operat

Hand Safety Toolbox Talk: Free PDF Download + Tip

Download PDF. Publication Date: Jan 2003 File type: PDF (79 KB) Asset type: Sign Sign: PS40 Pinch point is a technical term for any area in which someone can get injured by getting caught between the moving and stationary parts of an object or a machine. Pinch point injuries are quite common. It's estimated that about 125,000 people suffer from them every year, and they range from mild to fatal

Pinch Points Disclaimer: The information and suggestions contained in these safety talks are believed to be reliable. However, the authors of the topics and the owners of this web site accept no legal responsibility for the correctness, sufficiency, or completeness of such information o Toolbox Talk: Pinch Points (LS-89) Pinch points can cause serious injuries, including amputation or even death. They can occur on any part of the body when caught between two objects. Division: Division of Labor Standards. File A pinch point is really any space where a part of or a person's body can be caught between a stationary and a moving object or between two moving objects. If a person or their body part occupies that space during the pinching movement, there is a high probability of injuries such as crushing of tissues, fractures and even amputations Pinch Points - Toolbox Talk 28 INTRODUCTION A Pinch Point is produced when 2 objects come together and there is a possibility that a person could be caught or injured when coming in contact with that area. Pinch points commonly impact fingers / hands, but can impact any area of the body. The injury resultin Toolbox Talks are intended to facilitate health and safety discussions on the job site. For additional Toolbox Talks, please visit S TOPIC: Safe Practices - Pinch Points Pinch points are defined as any point where it is possible for a body part to be caught between moving and stationary portions if machinery or equipment

Free Safety Talks and Toolbox Talk Meeting Topics - Print

  1. Tool Box Talk Lift-gate Safety Keep hands and feet clear of all pinch points. There is a shear or pinch point exposure during lift-gate operations. Take note of where the lift-gate and the truck bed meet. Feet and hands are particularly vulnerable, during raising and lowering of the lift-gate
  2. In conclusion, it can be seen that the potential applications for tool box talks are endless and only limited by scarcity of resources and imagination. 3 Toolbox Talk #1 sharp edges, pinch points, or exposed electrical parts. Modern machines should have such risks designed out an
  3. TOOLBOX TALKS Working With and Around Suspended Loads Cranes are one of the most versatile, powerful and important pieces of construction entering areas of pinch points. 5. Check for proper balance of the load and that all items are clear of the path of travel. 6. Follow a written engineered lift plan for all critical lifts

When you design your own specialized tool box talks, remember some basic principals in giving instruction: Introduce what you are going to explain them, the body or key points you want to cover, and a conclusion. Ask for questions. Conclude with a reminder; the key point you tried to get across in the first place. Supervisor Trainin guardrails as anchor points. æ Do not use any lanyards without self locking snap hooks. æ Do not join multiple lanyards together to reach an anchorage. æ Do not allow more than one worker to tie-off to the same anchorage unless it is designed and approved by an engineer. æ Do not unhook from fall protection while exposed to a fal Toolbox Talk # 14.02 - Concrete Safety . Concrete is a mixture of cement, water, and aggregates, and often one or more additives. Some safety issues need to be addressed when working with concrete. Fresh, portland cement concrete is highly alkaline (caustic), and can cause skin irritation and burns Research for this Tool Box Talk was funded by CPWR - The Center for Construction Research and Training, using grant U60 OH009762 from the National Institute of Occupational Safety and Health (NIOSH). The contents are solely the responsibility of the authors and do not necessarily represent the official views of NIOSH

What is a toolbox talk? It is an informal meeting among a group of employees where the discussion focuses on safety. Who can give them? Anyone can conduct the discussion. It is best if led by a person with experience in the topic. How often should they be done? OFS supports the idea of a 5 minute safety talk each day before work begins. Why do. • Watch for pinch points, never put hands or fingers between an object. • Wear gloves when there is an exposure to hazards that could produce cuts or scrapes. • Never use fingers to align holes in parts. • Never wear rings while working. All jewelry can be dangerous at work. • When lifting materials, check for sharp or pointed object Be alert to pinch points and obstructions while working in close quarters Shovel in the direction the belt is moving and use a shovel without a D-handle 3) Pump Safety Never perform maintenance without first locking out and tagging out the power Make certain slurry and sealing lines are depressurized before beginning repair AGC Tool Box Safety Talk INTRODUCTION 1. Review any accidents or near accidents from the past week. 2. Describe the hazards of the work as they relate to your project. Explain or show the SAFE way of doing the job. 3. Give the TOOL BOX SAFETY TALK 13 EQUIPMENT: BARRICADING More than 100 people each year are killed by mobile heavy. TOOL BOX TALK HYDRO VACTOR EXCAVATOR TRUCK The Vactor offers a safe way to excavate, but it comes with a few hazards. These hazards can be reduces or eliminated with knowledge and proper training. Safety is the primary concern in all operations and is everybody's responsibility. Here are some of the hazards associated with the excavator.

Pinch Points - Third Coast Safet

OSHA Training Toolbox Talk: Transporting Portable Ladders Safely [Reference 1910 Subpart D / 1926 Subpart X] hand caught in a pinch-point. Take the time to lower the upper section of an extension ladder before you carry it to another position. The ladder may weigh the same in either position, but the leverage created by a longe chute presents a very serious pinch point when dropped into position. Keep hands away from the pinch point between the main chute and the flip down chute. Stay clear of the truck A fully loaded ready mix concrete truck may weigh up to 36 tons. It can easily crush you. On site delivery of our job-sites may require truck movement, so stay back Pinch Point Safety HS05-030B (8-07) A 5-Minute Safety Training Aid Don't get in a Pinch When you pinch a finger at home or away from work, it's usually no more than a painful nuisance. But pinches in the workplace can be a lot more serious. There is no comparing the power of a slammed screen door with the force of industrial machinery. A pinch discussion to demonstrate key points. What this Toolbox Talk covers: This toolbox talk covers how to use a stepladder safely. Discussion notes: Discuss the safety tips above and review various negative outcomes that could result from failure to follow these tips.. Title: Microsoft Word - Using a Stepladder Safely _No 6_.do Toolbox Training_Dumpster Safety_2 Revision Date: 15-Nov-17 Page 1 of 3 . SUPERVISOR INSTRUCTIONS: • Use toolbox trainings to encourage safety /environmental discussions during monthly meetings with employees. • Campus Services' employees should maintain the employee sign-in sheet in their department's safety/environmental compliance binder as a record of training

Pinch Point Danger - WorkSafeB

>> TOOLBOX TALK - Distracted Driving. While cell phone use when behind the wheel is one of the common forms of distracted driving, it is far from the only one. Distractions . We would usually put distracted driving into one of three categories: 1. Visual or audible distractions are things that can take your eyes or attention off the road (i.e. A pinch point is an area where two or more rotating parts move together with at least one part moving in a circle. These rotating parts may move at high rates of speed, making it difficult for an individual to pull free once caught. Injuries can occur when a person touches a belt or chain, tries to clear debris from drive wheels, or falls into. 1 - Pinch Points: Safety Training EH&S - MGA Goals: This safety session should teach you to: A. Recognize pinch point hazards. B. Know how to prevent pinch point injuries. OSHA Regulations: 29 CFR 1910.211-222 1. Workplace Injuries May Occur When a Body Part Gets Caught in a Pinch Point A. A pinch point is a place where it's possible for a body part to be caught: 1 Toolbox Talks The Asphalt Technical Advisory Committee have developed Safety Tools & Resources to assist companies in the road building sub sector with their safety programs. Originally called the Road Builder Group, the ATAC committee came together after the asphalt production industry faced a series of severe accidents and near misses February ToolBox Talk: Protecting Yourself in the Line of Fire. 2/23/2017 0 Comments eliminate possible pinch points on doors or hand tools, and always use the correct tool for the job. When planning your work, consider aspects of the job that put you in the line of fire and mitigate risks accordingly. For example

Avoid pinch points during setup and takedown. Extension ladder - Extension ladders are commonly used to reach rooftops or elevated walls. Setup is especially important for extension ladders which have feet that can slip or slide out from under the user. Log attendance for this toolbox talk on your mobile device for free. Get Safesite on iOS. Safety Resources for Hispanic Workers. Texas Department of Insurance 333 Guadalupe, Austin TX 78701 | P.O. Box 12030, Austin, TX 78711 | 512-676-6000 | 800-578-467 This week we are going to discuss another common source of workplace injuries, pinch points. The phrase, pinch point may not bring to mind a serious injury, however pinch points can create very severe injuries from crushed appendages or limbs to amputation. Let's take a look at defining what pinch points are, how to identify them, common causes of injuries and how to avoid pinch points E ach year, workers suffer approximately 125,000 caught or crush injuries that occur when body parts get caught between two objects or entangled with machinery. These hazards are also referred to as pinch points. The physical forces applied to a body part caught in a pinch point can vary and cause injuries ranging from bruises, cuts, and scalping to mangled and amputated body parts, and. Toolbox Talk Conveyor Safety Find a way to cut down on the amount of materials you handle manually, and you've got a good thing going. You lessen the chances of hurting your back and hands, which are two of the more common types of on-the-job injuries. In addition, your capacity for work will increase and so will production

Pinch points are defined as any point where it is possible for a body part to be caught between moving and stationary portions of equipment. Pinch points can come in a variety of shapes and sizes. A couple examples of unsafe conditions relating to pinch points are points of operation on machinery, unguarded moving equipment, and rotating parts Weekly Toolbox Talk: Material Handling and Safety. GLOVES: Employees will wear cut resistant gloves level 3 any time they are handling any metal material including but not limited to, studs, track, ceiling grid, corner bead or any other sharp- edged or pointed material that creates an exposure for cuts or puncture wounds

Safety Meeting Topics -Pinch Points - Safeopedi

Construction Safety Talk Series: Caught-In or Between Hazards. According to OSHA, Caught-In or -Between Hazards are defined as: Injuries resulting from a person being squeezed, caught, crushed, pinched, or compressed between two or more objects, or between parts of an object. By identifying caught-in or -between hazards, and understanding how. Toolbox Talk Topics. Behavioral Safety. Print Email Bad Habits. Safety Toolbox Talk Webmaster. Behavioral Safety. 2.6986301369863 1 1 1 1 1 1 1 1 1 1 Rating 2.70 (73 Votes) THE ASSOCIATED PRESS. Published: August 20, 2009. PINCH POINT; More Topics ». The industrialization of our daily tasks causes frequent interaction between people and machines. One major risk of this interaction is pinch point hazards. In some cases, pinch points can lead to amputation or death. In 2015 alone, workplace accidents led to nearly 3,000 amputations. An injury like this is irreversible and often times, difficult to mentally cope with The recent addition of a paid membership area was created as a means to fund the next growth of Safety Talk Ideas. The 250+ free talks found on the site will always be free, but the paid membership area will hold a large amount of new safety talks as well as other resources that safety pros need. This website is a living breathing thing

1-800-321-OSHA (6742) • www.osha.gov 1 Working Safely with Scissor Lifts Scissor lifts provide a safe and reliable platform for workers to perform job tasks when use During your Toolbox Talk, talk to the people about where that energy will go if released, and how they are staying out of that path. Discuss how quickly things can happen and that they probably won't have time to move out of the way Toolbox Safety Talks 4: Blood-borne Pathogens. Chemicals, Flammables, Fire. Toolbox Safety Talks 5: Chemical Emissions. Toolbox Safety Talks 15: Flammable and Combustible Materials. Toolbox Safety Talks 43: Oil and Petroleum-Based Products Working with Silica (PDF). APCA developed a toolbox talk for workers focusing on the hazards related to silica. (2017, April). The toolbox talk covers requirements of the final rule for construction employers and was adapted for this industry from a toolbox talk developed by the Sealant Waterproofing and Restoration Institute

Toolbox Talk: Pinch Points (LS-89) Missouri Labo

Toolbox Talk Hand & Power Tools - Amputation Hazards In addition to in-running nip points (pinch points)—which occur when two parts move together and at least one moves in a rotary or circular motion that gears, rollers, belt drives, and pulleys generate—th The Toolbox Talks can be used one at a time for short safety or Toolbox Talks. Or they can be used as modules in a longer training session, such as annual refresher training. No training expertise is needed by the presenter to run sessions with the guidance of this material. Each Toolbox Talk contains these sections Pinch Points Toolbox Talk. This safety talk is designed for discussion leaders to use in preparing safety meetings. Set a specific time and date for your safety meeting. Publicize your meeting so everyone involved will be sure to attend. Review this safety talk before the meeting and become familiar with its content Toolbox Safety Talks for Fabrication Shops Mechanical Contractors Association of America, Inc. 1385 Piccard Drive Rockville, MD 20850 800-556-3653 • www.mcaa.or

Tool Box Talk: Pinch Point Injuries - Cornett's Corne

Hand and Pinch Point Safety - Safety Skill

CONSTRUCTION SAFETY TOOL BOX TALK SERIES - RIGGING AND SUSPENDED LOADS Sung fflure Be-mg hit by a swnging Load faring wt of the rigging Talk Given By: Company: PROCEDURE Always inspect bebre each use. Uly sling from œnice. Know tie bad capacity of the sling based the hitch configurabon_ UnderstUld that at angles have reduced lifting capacity Use caution when opening or closing lids, watch for hand placement and pinch points. (Be especially cautious on windy days) Do not try to fight a dumpster fire - notify the fire department Dispose of food waste in sealed trash bags Some ordinances require lids to be securely close Machine Safeguarding at the Point of Operation Machine Safeguarding at the Point of Operation is an Oregon OSHA Standards and Technical Resources Section publication. A guide for finding solutions to machine hazards. 144 Kb: Toolbox Talk: Machine Guardin Pinch points are basically traps for the hand especially. Doors may pinch your fingers if you get them caught in a jam. Paying attention and being aware of their existence helps us to avoid pinch points. We also need to take the proper precautions to avoid being pinched. Our hands are also subject to cuts, bruises, burns and poking

Mechanical Hazards: Pinch Points - Ag Safety and Healt

Pinch_Points - 1 Pinch Points Safety Training EH&S \u2013

The mute point is set at .250-inches above the material thickness, and it is required that it be used. According to OSHA guidelines, the press is closed to the mute point before any part of your body is to get within 4-inches of the pinch point. At that point you can adjust the workpiece against the backgauge and complete the bend MOCGA Toolbox Talk Utility Locator SafetyUtility Locator Safety Introduction: Locators drive and walk many miles each day. Some locators can walk up to 6 miles on a busy day! There are many hazards encountered during a routine day of work including bugs, dogs, traffic and confused property landowners. Good health, flexibility, rest and awarenes Toolbox Talk Hand Safety From our earliest moments, we use our hands to learn, to explore and to interact with the world around us, and now as working adults, our hands continue to be out front, touching, grasping, pushing, pulling and lifting our way through work and through life TOOL BOX TALKS OX TALK Communication is one of the best ways to prevent accidents. And one of the best ways of communicating the importance of safety on a construction job is through toolbox talks. You don't have to be a professional speaker to give a good toolbox talk. But there are ways you can make your talks more effective

Toolbox Talks - BCCS

Toolbox Talk. Personal Protective Equipment • Eye & Face Protection • Head Protection • Hand Protection • Foot Protection • Body Protection • Respiratory Protection. Eye & Face Protection Types of Eye and Face PPE 1. Safety glasses 1) 2. Goggles 3. Face shields. Toolbox Talk: Safety Around Livestock or Farm Animals Background Cows, horses, sheep, pigs, and dogs are common fixtures on many farms and ranches in Alberta. The hazards pinch points on gates, equipment or tools being used and handling or administering medications. Let's not forget about biosecurity concerns, and the potential for. Toolbox Training Ladder Safety Pro_1 Revision Date: 15-Mar-18 Page 1 of 2 . SUPERVISOR INSTRUCTIONS: • Use toolbox trainings to encourage safety/environmental discussions during monthly meetings with employees. • Campus Services' employees should maintain the employee sign-in sheet in their department's safety/environmental compliance binder as a record of training

Toolbox Talk One - Fatigue Avoidance Fatigue is one of the leading causes of injury at the workplace and at home. It's often tempting to list needs to pay more attention in the cause box on an injury report. If this is the case, consider that fatigue might be both more accurate and exist around blasting. On the reverse side, there is a list of Best Practices and a set of Talking Points. 3 sets of postcards: There is a set of postcards for 3 of the pamphlets. These postcards contain related photos and drawings. You may want to improve these safety talks by adding photo Tool Box Talks. A Tool Box Talk is an informal safety meeting that focuses on safety topics related to the specific job, such as workplace hazards and safe work practices. Construction companies hold Tool Box Talks before the commencement of a job or work shift. A Tool Box Talk is an effective method to refresh workers' knowledge, cover last.